Why Our Products?

Global Regenerative Trade serves as a hub, bringing together products used in various fields of medicine. Using cumulative knowledge and expertise in the field of Regenerative medicine, we develop products which enhance the quality of life of patients and are more user-friendly for doctors.

Professional Excellence

in Regenerative Medicine Care

CureOs Bone Graft

CureOs® synthetic bone graft is used for helping to repair all bone defects which occur in iatrogenic or acquired way. CureOs strongly supports new bone formation and helps the cure of bone defects with surgical intervention.CureOs can be mixed with bone marrow, blood and clinically known bone grafts.

Influx® Trabecular Bone Graft

CAPTURE THE FLOW OF OSTEOINDUCTIVE POTENTIAL. Influx is a natural bone graft material that provides osteoinductivity and promotes cell ingrowth

InQu® Bone Graft Extender & Substitute

A safe and cost-effective bone graft substitute and extender, InQu creates a natural microenvironment supporting new bone formation in spinal fusions and orthopedic procedures.

KANFIT 3D Custom Made Specific Medical Implants

Kanfit 3D specializes in Additive Manufacturing of medical and aerospace components, including custom-made implants, made from Ti-64 titanium metal.

LIGHTNING NEEDLE™ SET

The Lightning Bone Marrow Aspiration Cannula System is a single use, disposable device that contains eight large, bevel-edged fenestrations allowing for gentle bone marrow aspiration.

Magellan® Autologous Concentrating System

Magellan is a fully-automated concentration system optimized to provide high concentrations of platelets and cells for orthopedic applications.

NITHYA COLLAGEN

Nithya is a range of collagen-based medical devices manufactured by the euroresearch company, a market leader in the collagen sector. Our extensive experience has enabled us to create safe, effective collagen-based products.

REMODEM SWELLING REDUCING GEL

Remove swelling and bruises

The Vivostat® system

The uniqueness of the Vivostat^® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF^®) without using cryoprecipitation and without the need for a separate thrombin component.

CarboFix Carbon Fiber Implants

CarboFix nails, plates, and pedicle screws are made of continuous carbon fibers reinforced polymer.

The Polymer (PEEK) adhere the fibers together.

The continuous carbon fibers are layered in a unidirectional, longitudinal orientation, as well as in helical / diagonal orientation.

AuraFix Supporters

The service we offer shows that we believe that every single person has a right to use high-quality medical products. As Aurafix Team, we work to produce durable, high-quality, healthy and life-enhancing products by applying the knowledge we have gained from our experience with our suppliers.

Get in touch

Leave your name and email below along with what you are looking for in the message box. Or you can call us at +1 (305) 988-8996

THE VIVOSTAT® SYSTEM

The uniqueness of the Vivostat^® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF^®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT^® SYSTEM CONSISTS OF THREE COMPONENTS:

The Processor Unit

The Processor Unit is a non-sterile, reusable, fully automated device that controls the biochemical process.

The Processor Unit is used to process the patient’s blood and prepare the Vivostat^® Fibrin Sealant or Vivostat PRF^® solution.

The Processor Unit is operated by a single button and a display keeps the nurse informed of the remaining process time and status at all times. No specific installation is required and the large wheelbase makes moving it easy.

The Processor Unit can be located in any room or corridor in the operating department. It is most often placed centrally between the operating theatres. This way one Processor Unit can supply a number of operating theatres.

In approx. 25 min a concentrated fibrin sealant or PRF^® solution is prepared from the patient’s whole blood.

Applicator Unit

The Applicator Unit is a non-sterile, reusable, fully automated device that controls the delivery of the Vivostat^® Fibrin Sealant or Vivostat PRF^®.

The large display and integrated microprocessor automatically primes the Spraypen^® and informs the surgeon of the remaining volume of fibrin sealant/PRF^® throughout the entire process.

Different spray modes can be selected depending on the actual procedure or area to be covered. Like the Processor Unit it has a large wheelbase and can easily be moved if required.

The Disposable Set

The disposable set comprises of two parts: A Preparation Kit used to prepare the fibrin sealant or PRF^® solution before surgery, and an Application Kit used to activate and apply the fibrin sealant/PRF^® solution.

Preparation Kit
The Preparation Kit contains the specially designed Preparation Unit – a sterile disposable device in which the patient’s blood is collected, the biochemical process carried out, and the fibrin sealant or PRF^® solution harvested.

The Application Kit
The Application Kit contains the Spraypen^®1 and all other items required to prepare the system for the delivery of the fibrin sealant or PRF^® solution. The Spraypen^® is a sterile, disposable, hand held device which delivers the fibrin sealant or PRF^® solution to the tissue. The revolutionary and patented design offers the surgeon unparalleled freedom in controlling the application unlike any other product on the market today.

1Besides the Spraypen^®, the Vivostat^® system offers different types of applicators, e.g. the Endoscopic Applicator. For a full list of application devices click here

Preparing Vivostat

1-2-3 Spray

Three easy steps to prepare Vivostat^® Fibrin Sealant or Vivostat PRF^®

1. Draw blood from the Patient

At the time of surgery or up to 24 hours before1, citrate (supplied with the kit) is added to the Preparation Unit. 120 ml of the patient’s own blood is then drawn into the same unit.

2. Process the patient’s blood

The Preparation Unit is placed in the Processor Unit. At the touch of a button the process starts; after approx. 25 minutes, an autologous fibrin or PRF^® solution is ready for use. No thrombin or bovine components are added to the blood at any time.

3. Load the Applicator Unit and spray

The Fibrin or PRF^® solution is easily loaded into the Applicator Unit and applied to the surgical site using one of the unique application devices (e.g. the Spraypen). 1This depends on the type of kit being used. Always consult the “Instructions for Use” supplied with the kit to determine the correct preparation.

The following video illustrates how to prepare and apply autologous fibrin sealant.

Presentation DVD from Vivostat A/S on Vimeo.

Why Our Products?

Products

Professional Excellence

in Regenerative Medicine Care

CureOs Bone Graft

Influx® Trabecular Bone Graft

InQu® Bone Graft Extender & Substitute

KANFIT 3D Custom Made Specific Medical Implants

LIGHTNING NEEDLE™ SET

Magellan® Autologous Concentrating System

NITHYA COLLAGEN

REMODEM SWELLING REDUCING GEL

The Vivostat® system

CarboFix Carbon Fiber Implants

AuraFix Supporters

Get in touch

Quick links

Newsletter

THE VIVOSTAT® SYSTEM

The uniqueness of the Vivostat^® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF^®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT^® SYSTEM CONSISTS OF THREE COMPONENTS:

The Processor Unit is a non-sterile, reusable, fully automated device that controls the biochemical process.

The Processor Unit is used to process the patient’s blood and prepare the Vivostat^® Fibrin Sealant or Vivostat PRF^® solution.

The Processor Unit is operated by a single button and a display keeps the nurse informed of the remaining process time and status at all times. No specific installation is required and the large wheelbase makes moving it easy.

The Processor Unit can be located in any room or corridor in the operating department. It is most often placed centrally between the operating theatres. This way one Processor Unit can supply a number of operating theatres.

In approx. 25 min a concentrated fibrin sealant or PRF^® solution is prepared from the patient’s whole blood.

The Applicator Unit is a non-sterile, reusable, fully automated device that controls the delivery of the Vivostat^® Fibrin Sealant or Vivostat PRF^®.

The large display and integrated microprocessor automatically primes the Spraypen^® and informs the surgeon of the remaining volume of fibrin sealant/PRF^® throughout the entire process.

Different spray modes can be selected depending on the actual procedure or area to be covered. Like the Processor Unit it has a large wheelbase and can easily be moved if required.

The disposable set comprises of two parts: A Preparation Kit used to prepare the fibrin sealant or PRF^® solution before surgery, and an Application Kit used to activate and apply the fibrin sealant/PRF^® solution.

Preparation Kit

The Preparation Kit contains the specially designed Preparation Unit – a sterile disposable device in which the patient’s blood is collected, the biochemical process carried out, and the fibrin sealant or PRF^® solution harvested.

The Application Kit

1-2-3 Spray

Three easy steps to prepare Vivostat^® Fibrin Sealant or Vivostat PRF^®

1. Draw blood from the Patient

2. Process the patient’s blood

3. Load the Applicator Unit and spray

PREPARATION AND APPLICATION

The following video illustrates how to prepare and apply autologous fibrin sealant.

Why Our Products?

Products

Professional Excellence

in Regenerative Medicine Care

CureOs Bone Graft

Influx® Trabecular Bone Graft

InQu® Bone Graft Extender & Substitute

KANFIT 3D Custom Made Specific Medical Implants

LIGHTNING NEEDLE™ SET

Magellan® Autologous Concentrating System

NITHYA COLLAGEN

REMODEM SWELLING REDUCING GEL

The Vivostat® system

CarboFix Carbon Fiber Implants

AuraFix Supporters

Get in touch

THE VIVOSTAT® SYSTEM

The uniqueness of the Vivostat® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT® SYSTEM CONSISTS OF THREE COMPONENTS:

The Processor Unit is a non-sterile, reusable, fully automated device that controls the biochemical process.

The Processor Unit is used to process the patient’s blood and prepare the Vivostat® Fibrin Sealant or Vivostat PRF® solution.

The Processor Unit is operated by a single button and a display keeps the nurse informed of the remaining process time and status at all times. No specific installation is required and the large wheelbase makes moving it easy.

The Processor Unit can be located in any room or corridor in the operating department. It is most often placed centrally between the operating theatres. This way one Processor Unit can supply a number of operating theatres.

In approx. 25 min a concentrated fibrin sealant or PRF® solution is prepared from the patient’s whole blood.

The Applicator Unit is a non-sterile, reusable, fully automated device that controls the delivery of the Vivostat® Fibrin Sealant or Vivostat PRF®.

The large display and integrated microprocessor automatically primes the Spraypen® and informs the surgeon of the remaining volume of fibrin sealant/PRF® throughout the entire process.

Different spray modes can be selected depending on the actual procedure or area to be covered. Like the Processor Unit it has a large wheelbase and can easily be moved if required.

The disposable set comprises of two parts: A Preparation Kit used to prepare the fibrin sealant or PRF® solution before surgery, and an Application Kit used to activate and apply the fibrin sealant/PRF® solution.

Preparation Kit

The Preparation Kit contains the specially designed Preparation Unit – a sterile disposable device in which the patient’s blood is collected, the biochemical process carried out, and the fibrin sealant or PRF® solution harvested.

The Application Kit

1-2-3 Spray

Three easy steps to prepare Vivostat® Fibrin Sealant or Vivostat PRF®

1. Draw blood from the Patient

2. Process the patient’s blood

3. Load the Applicator Unit and spray

PREPARATION AND APPLICATION

The following video illustrates how to prepare and apply autologous fibrin sealant.

The uniqueness of the Vivostat^® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF^®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT^® SYSTEM CONSISTS OF THREE COMPONENTS:

The Processor Unit is used to process the patient’s blood and prepare the Vivostat^® Fibrin Sealant or Vivostat PRF^® solution.

In approx. 25 min a concentrated fibrin sealant or PRF^® solution is prepared from the patient’s whole blood.

The Applicator Unit is a non-sterile, reusable, fully automated device that controls the delivery of the Vivostat^® Fibrin Sealant or Vivostat PRF^®.

The large display and integrated microprocessor automatically primes the Spraypen^® and informs the surgeon of the remaining volume of fibrin sealant/PRF^® throughout the entire process.

The disposable set comprises of two parts: A Preparation Kit used to prepare the fibrin sealant or PRF^® solution before surgery, and an Application Kit used to activate and apply the fibrin sealant/PRF^® solution.

The Preparation Kit contains the specially designed Preparation Unit – a sterile disposable device in which the patient’s blood is collected, the biochemical process carried out, and the fibrin sealant or PRF^® solution harvested.

Three easy steps to prepare Vivostat^® Fibrin Sealant or Vivostat PRF^®