Global Regenerative Trade

GZ ORTHOPEDICS Carbon Fiber Implants

GZ Orthopedics Carbon Fiber Implants

GZ Orthopedics Carbon Fiber Implants

GZ ORTHOPEDICS nails, plates, and pedicle screws are made of continuous carbon fibers reinforced polymer.

The Polymer (PEEK) adhere the fibers together. 

The continuous carbon fibers are layered in a unidirectional, longitudinal orientation, as well as in helical / diagonal orientation.  

why us

Fast growing company

Engaged in developing

Innovative solutions

INFORMATION

about the product

GZ ORTHOPEDICS CARBON FIBER IMPLANTS

WHY CARBOFIX CARBON FIBER IMPLANTS

CARBON FIBER IMPLANTS TECHNOLOGY

GZ ORTHOPEDICS “Piccolo” nails & plates are made of continuous carbon fibers reinforced polymer. The continuous carbon fibers are woven in a unidirectional orientation at the core of the nail. The core is wrapped by additional helical fibers. The GZ ORTHOPEDICS “Piccolo” plates are made out of continuous carbon fibers  in longitudinal as well as diagonal orientation.

CT & MRI: No artifacts

The GZ ORTHOPEDICS implants allow CT & MRI scans with no/minimal artifacts caused by the carbon fibers implant. Clear imaging of the soft tissue surrounding the bone is advantageous in pathological cases.

Unparalleled fatigue strength

In comparative fatigue experiments of Ø8.5mm nails, a Titanium rod failed after 40,000 cycles, a Stainless Steel rod failed after 440,000 cycles, and the CarboFix nail did not fail even after 4,000,000 cycles.

Radiolucency

GZ ORTHOPEDICS implants are radiolucent, offering improved fracture and tissue imaging intra-op & post-op. The fracture line can be seen clearly through the implant which does not disrupt the view.

Improved modulus of elasticity

The modulus of elasticity of the composite material is close to that of cortical bone. This might lower the risk for stress risers and secondary fractures, as well as to contribute to early fracture healing.

GZ ORTHOPEDICS “Piccolo” Implants Portfolio Includes

CarboFix "Piccolo" Tibia Nails
Carbofix Product

Intramedullary nails for Humerus, Tibia & Femur, as well as Ankle Arthrodesis nail

Plates for Distal Radius, Proximal Humerus & Distal Fibula and others.

GZ ORTHOPEDICS Products Portfolio

Orthopedic Products

CarboClear® Pedicle Screw System

Made of continuous carbon fibers reinforced polymer.

Poly-Axial Screw Design – 15° trajectory variation.

Bone / screw interface: Ultrathin Titanium Shell
 for better bone integration.

Features:

MRI & CT: No artifacts.
Oncology: Essential in radiation therapy:
No backscattering.
No attenuation. 
Precise radiation planning.
Unparalleled Fatigue Strength.
Optimal Modulus of Elasticity.
Radiolucent: Allows effective follow-up.

Available Sizes for Pedicle Screws & Rods
Tables for Special Rods for Oncology & Locking Elements
Various Carbon Fiber Implants

Piccolo" Proximal Humeral Plate

Made of continuous carbon fibers reinforced Polymer

The plate is anatomically shaped

Universal design for Right & Left Humerus

Low profile: plate thickness 3.7mm

Circumference radiopaque marking outlining plate contour for positioning & follow-up

CarboFix Proximal Humerus plates are FDA cleared and CE marked

Features

Radiolucent: Superior fracture imaging

Unparalleled fatigue strength

Improved modulus of elasticity

No cold welding

Available Sizes for Nail
CarboFix Distal Femur Plates

CarboFix Distal Femur Plates

Made of continuous carbon fibers reinforced polymer

The Distal Femur plates are anatomically shaped

Screw holes accommodate both locking and non-locking screws

Circumference radiopaque marking outlining plate contour for positioning

CarboFix Distal Femur plate is FDA cleared and CE marked

Poly-Axial locking screws – up to 10° trajectory variation

Available Sizes for Distal Femur
Carbon Fiber Nail

CarboFix "Piccolo" Trochanteric (PF) Nail


Made of continuous carbon fibers reinforced polymer

The nail have a 5° proximal anteversion

Ultra-thin titanium shell coating of the lag screw

The nail cap is made of composite material and is radiolucent

Radiopaque markers around the drill holes and along the nails’ length

axis facilitate positioning and drilling

Lag Srcew and the long Nail are cannulated

CarboFix Piccolo Proximal Nail is FDA cleared and CE marked

Available Sizes for Different Implant Types
CarboFix "Piccolo" Tibia Nails

CarboFix "Piccolo" Tibia Nails

Made of continuous carbon fibers reinforced polymer.

The nail has a 9° bending at its proximal end.

The screw holes are threaded for enhanced screw fixation.

CarboFix Tibia nails are cannulated for insertion over a proprietary

2.4mm guide wire.

The nail cap is made of composite material and is radiolucent.

Radiopaque markers around the drill holes and along the nails’ length

axis facilitate positioning and drilling.

CarboFix Tibia nails are FDA cleared and CE marked.

Available Sizes for Shaft & Proximal
Carbon Fiber Implant

CarboFix "Piccolo" Femur Nails

Made of continuous carbon fibers reinforced polymer.

The nails are shaped as an anatomical bow, representing a radian of 1.5

meters (apart for the 200mm nails, which are not curved).

The screw holes are threaded for enhanced screw fixation.

CarboFix Femur nails are cannulated for insertion over a proprietary

2.4mm guide wire.

The nail cap is made of composite material and is radiolucent.

Radiopaque markers around the drill holes and along the nails’ length

axis facilitate positioning and drilling.

CarboFix Femur nails are FDA cleared and CE marked.

Global Regenerative Trade Product Available Sizes
CarboFix "Piccolo" Diaphyseal Plate

CarboFix "Piccolo" Diaphyseal Plate

Made of continuous carbon fibers reinforced polymer.

The carbon fibers are arranged in a unidirectional longitudinal

orientation, as well as in a diagonal orientation, allowing multidirectional strength in all planes.

Narrow & Broad designs are available

Radiolucent: clear view of the fracture site

Circumference radiopaque marking outlining plate contour for

positioning & follow-up.

Polyaxial locking screws – up to 10° trajectory variation.

Screw holes accommodate both locking and non-locking screws.

CarboFix Diaphyseal Plates are FDA cleared and CE marked.

Table for Available Sizes
CarboFix "Piccolo" Ankle Arthrodesis Nail

CarboFix "Piccolo" Ankle Arthrodesis Nail

Made of continuous carbon fibers reinforced polymer.

The carbon fibers are arranged in a unidirectional longitudinal orientation, as well as in a diagonal orientation, allowing multidirectional strength in all planes.

Radiolucent: Clear view of the fusion site.

Nail internal Tibiotalar compression mechanism up to 7mm.

External compression up to 30mm using the Insertion Handle.

The screw holes have an inner thread for enhanced screw fixation to the nail.

The nail cap is made of composite material and is radiolucent.

Radiopaque markers around the drill holes and along the nails’ length axis facilitate positioning and drilling.

CarboFix Ankle Arthrodesis nails are FDA cleared and CE marked.

Sizes for Proximal Screws, Distal Screws, & Nail Caps
CarboFix Plate

CarboFix "Piccolo" Distal Fibula Plate

Made of continuous carbon Fibers reinforced polymer.

Two types of Fibula plates are available:

– Anatomical Distal Fibula plate.

– One Third Tubular plate.

Low profile: plate thickness 2.3mm.

Polyaxial locking screws – up to 10° trajectory variation.

Screw holes accommodate both locking and non locking screws.

Circumference radiopaque marking outlining plate contour for positioning & follow-up.

CarboFix Fibula plates are FDA cleared and CE marked.

Available sizes for Anatomical Distal Fibula & One Third Tubular
Carbon Fiber Implants

CarboFix "Piccolo" MTP Fusion Plate

Made of continuous carbon fiber reinforced polymer.

Low profile: plate thickness 2.0mm.

Thread-less screw holes, thus the screw creates its own thread

Polyaxial locking screws – up to 10° trajectory variation.

Screw holes accommodate both locking and non locking screws.

Circumference radiopaque marking outlining plate contour for positioning & follow-up.

CarboFix Fibula plates are FDA cleared and CE marked.

Sizes Available Chart
CarboFix "Piccolo" Lapidus Plate

CarboFix "Piccolo" Lapidus Plate

Made of continuous carbon fiber reinforced polymer.

Low profile: plate thickness 2.0mm.

Thread-less screw holes, thus the screw creates its own thread

Polyaxial locking screws – up to 10° trajectory variation.

Screw holes accommodate both locking and non locking screws.

Circumference radiopaque marking outlining plate contour for positioning & follow-up.

CarboFix Lapidus plate is FDA cleared.

Available Sizes for Global Regenerative Trade Product
Distal Fibula Plate

CarboFix "Piccolo" Distal Fibula Plate

Made of continuous carbon Fibers reinforced polymer.

Two types of Fibula plates are available:

– Anatomical Distal Fibula plate.

– One Third Tubular plate.

Low profile: plate thickness 2.3mm.

Polyaxial locking screws – up to 10° trajectory variation.

Screw holes accommodate both locking and non locking screws.

Circumference radiopaque marking outlining plate contour for positioning & follow-up.

CarboFix Fibula plates are FDA cleared and CE marked.

Available sizes for Anatomical Distal Fibula & One Third Tubular
Vivostat Logo

THE VIVOSTAT® SYSTEM

The uniqueness of the Vivostat® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT® SYSTEM CONSISTS OF THREE COMPONENTS: