CONCENTRATE AT THE PUSH OF A BUTTON

Magellan is a fully-automated concentration system optimized to provide high concentrations of platelets and cells for orthopedic applications.

why us

Fast growing company

Engaged in developing

Innovative solutions

INFORMATION

about the product

Magellan Autologous Concentration System: PRP and BMAC.

CONCENTRATE AT THE PUSH OF A BUTTON

Fully Automated

Simple one-button start for ease of use

________________________________________________

Closed System

Minimal breaks in sterile barrier promote safety

________________________________________________

BioAdaptive Processing

Works with optical sensors to tailor processing parameters based on each patient’s hematocrit

________________________________________________

Optical Sensors

Identify the cellular fraction to eliminate error

and optimize results

________________________________________________

Selectable Output

Allows users to define desired therapeutic volumes (3-10 mL per cycle)

DELIVER PERSONALIZED MEDICINE

Fully Automated

Fully-automated, closed system produces consistent and reproducible output requiring no manual extraction

Autologous

Optimized to provide high concentrations of platelets, progenitor cells, and platelet-associated growth factors in low final output volume2

Every patient has a unique biology with inherent variability, so you need a solution that is customized for each patient. Go beyond the standard of care and deliver a personalized biologic with the Magellan® Autologous Concentration System.

Fully Automated

Fully-automated, closed system produces consistent and reproducible output requiring no manual extraction

Autologous

Optimized to provide high concentrations of platelets, progenitor cells, and platelet-associated growth factors in low final output volume2

Cost-Effective

A single disposable kit can process up to three cycles per patient, offering a cost-effective solution

Customized

Adaptive technology adjusts processing times based on patient’s specific blood and marrow composition

Flexible

Flexibility to process both bone marrow aspirate and whole blood at the point-of-care

Built to Concentrate

Achieves concentration factors up to 14 times baseline9

MEDICAL PROFESSIONALS

The Magellan Autologous Concentration System can be used in a wide range of surgical procedures and environments. In the menu below you will find the most common areas of use for MAGELLAN^®

Proven to Concentrate Viable Progenitor Cells

Data featuring Magellan MAR0Max demonstrates increased concentrations of MSCs & HSCs

AMPLIFY ESSENTIAL GROWTH FACTORS UP TO 14X BASELINE2

INSTRUCTIONAL VIDEOS

Download brochure

Bone Marrow Aspiration Guide

Instructions for Use

Personalized options

CONCENTRATE AT THE PUSH OF A BUTTON

why us

Fast growing company

Engaged in developing

Innovative solutions

INFORMATION

Magellan Autologous Concentration System: PRP and BMAC.

CONCENTRATE AT THE PUSH OF A BUTTON

Fully Automated

Simple one-button start for ease of use

________________________________________________

Closed System

Minimal breaks in sterile barrier promote safety

________________________________________________

BioAdaptive Processing

Works with optical sensors to tailor processing parameters based on each patient’s hematocrit

________________________________________________

Optical Sensors

Identify the cellular fraction to eliminate error

and optimize results

________________________________________________

Selectable Output

Allows users to define desired therapeutic volumes (3-10 mL per cycle)

DELIVER PERSONALIZED MEDICINE

Fully Automated

Autologous

Fully Automated

Autologous

Cost-Effective

Customized

Flexible

Built to Concentrate

The Magellan Autologous Concentration System can be used in a wide range of surgical procedures and environments. In the menu below you will find the most common areas of use for MAGELLAN®

Proven to Concentrate Viable Progenitor Cells

AMPLIFY ESSENTIAL GROWTH FACTORS UP TO 14X BASELINE2

INSTRUCTIONAL VIDEOS

THE VIVOSTAT® SYSTEM

The uniqueness of the Vivostat® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT® SYSTEM CONSISTS OF THREE COMPONENTS:

The Processor Unit is a non-sterile, reusable, fully automated device that controls the biochemical process.

The Processor Unit is used to process the patient’s blood and prepare the Vivostat® Fibrin Sealant or Vivostat PRF® solution.

The Processor Unit is operated by a single button and a display keeps the nurse informed of the remaining process time and status at all times. No specific installation is required and the large wheelbase makes moving it easy.

The Processor Unit can be located in any room or corridor in the operating department. It is most often placed centrally between the operating theatres. This way one Processor Unit can supply a number of operating theatres.

In approx. 25 min a concentrated fibrin sealant or PRF® solution is prepared from the patient’s whole blood.

The Applicator Unit is a non-sterile, reusable, fully automated device that controls the delivery of the Vivostat® Fibrin Sealant or Vivostat PRF®.

The large display and integrated microprocessor automatically primes the Spraypen® and informs the surgeon of the remaining volume of fibrin sealant/PRF® throughout the entire process.

Different spray modes can be selected depending on the actual procedure or area to be covered. Like the Processor Unit it has a large wheelbase and can easily be moved if required.

The disposable set comprises of two parts: A Preparation Kit used to prepare the fibrin sealant or PRF® solution before surgery, and an Application Kit used to activate and apply the fibrin sealant/PRF® solution.

Preparation Kit

The Preparation Kit contains the specially designed Preparation Unit – a sterile disposable device in which the patient’s blood is collected, the biochemical process carried out, and the fibrin sealant or PRF® solution harvested.

The Application Kit

1-2-3 Spray

Three easy steps to prepare Vivostat® Fibrin Sealant or Vivostat PRF®

1. Draw blood from the Patient

2. Process the patient’s blood

3. Load the Applicator Unit and spray

PREPARATION AND APPLICATION

The following video illustrates how to prepare and apply autologous fibrin sealant.

The Magellan Autologous Concentration System can be used in a wide range of surgical procedures and environments. In the menu below you will find the most common areas of use for MAGELLAN^®

The uniqueness of the Vivostat^® system is a novel patented biotechnological process that enables reliable and reproducible preparation of autologous Fibrin Sealant or Platelet Rich Fibrin (PRF^®) without using cryoprecipitation and without the need for a separate thrombin component.

THE FULLY AUTOMATED VIVOSTAT^® SYSTEM CONSISTS OF THREE COMPONENTS:

The Processor Unit is used to process the patient’s blood and prepare the Vivostat^® Fibrin Sealant or Vivostat PRF^® solution.

In approx. 25 min a concentrated fibrin sealant or PRF^® solution is prepared from the patient’s whole blood.

The Applicator Unit is a non-sterile, reusable, fully automated device that controls the delivery of the Vivostat^® Fibrin Sealant or Vivostat PRF^®.

The large display and integrated microprocessor automatically primes the Spraypen^® and informs the surgeon of the remaining volume of fibrin sealant/PRF^® throughout the entire process.

The disposable set comprises of two parts: A Preparation Kit used to prepare the fibrin sealant or PRF^® solution before surgery, and an Application Kit used to activate and apply the fibrin sealant/PRF^® solution.

The Preparation Kit contains the specially designed Preparation Unit – a sterile disposable device in which the patient’s blood is collected, the biochemical process carried out, and the fibrin sealant or PRF^® solution harvested.

Three easy steps to prepare Vivostat^® Fibrin Sealant or Vivostat PRF^®